We at TROCKI-GORDON SUPPLY are proud to partner with Garlock / Klozure® to further extend the reliability of sealing rotary shafts using high performance dynamic seals. These seals are specifically suited to applications where liquids pumped are extremely viscous and have a tendency of becoming tacky and hard to pump using conventional mechanical seal design.

PRODUCTS

P/S-II - standard triple lip for positive displacement pumps.

  • BLACKMER
  • MOYNO
  • ROPER
  • TUTHILL
  • VIKING
  • MIXERS
  • CONVEYORS
  • ROTARY VALVES

Typical applications: Asphalt, Chocolate, Emulsions, Fuels, Glue, Ink, Latex, Oil, Paints, Polymers, Resins, Soaps, Starch, Syrups, Tallow, Tar, Varnish, Wax.

XPS - multiple elements which deploy a new seal on demand for centrifugal pumps.

  • DURCO
  • GOULD
  • WORTHINGTON
  • AND MANY OTHERS

Typical applications: Thin films, White Water, Dirty Water, Calcified Slurry, Paints.

3D MIXER SEAL - multiple element cartridge design mixer seal

Features: compensates for extreme shaft movement - can run dry .

Temperature: 300 degrees F
Surface Speed Range: 700 fpm (25 mps) dry - 2500 fpm (12.7 mps) with lubrication
Pressure and Vacuum: 28" Hg to 150 psig (700 mm Hg to 10 bar)
Sleeve Finish: 4 to 6 Mu. In.
Sleeve Hardness: 50 to 70 Rockwell C
Sleeve Coating: Specified Based on Application
Flexible Housing Material: PTFE, 316 S.S., Hastelloy C 276
Movement Capability: 1.000" Total Indicator Runout, 1.000" Total Axial Movement
  • Above 300 degrees F or 150 psig, please consult with Engineering

GPA SLURRY SEAL - heavy duty cartridge or component seal

Features: for heavy slurries - special disc spring - no clogging - requires no flush

Shaft Size Range: 0.788 to 7.000" (20 to 178 mm)
Surface Speed Range: 3,000 fpm (15.2 mps)
Pressure and Vacuum: 300 PSI (20 bar) - 28" Hg (711 mm)
Temperature: 32 - 310 degrees F (0 - 154 degrees C)